Tips to avoid problems in the Hydraulic Installation of your work:

plumber


Making a renovation requires a lot of attention to prevent mistakes from happening. Not everyone is aware of the plumbing, pipes, logs and other things that involve the water part of the house.

Simple tips can help you avoid problems.

1 – Talk to the plumber about the water points you want to have at home (sinks, toilets and faucets), and check how the pipes will be installed. Poorly made pipes and pipes of inferior quality are the main sources of cold water problems. Therefore, it is essential to know which pipes will be used in your home, where they will pass and test them before closing the walls. Also buy the appropriate connections.

2: Make sure the crockery and faucets are of good quality as well as beautiful. It’s no use having the best crockery and faucets and installing them inappropriately or buying the wrong part for the intended use. The person responsible for the work can help you choose.
Manufacturers warranties against manufacturing defects and never against defects in installation or purchase. Keep an eye!

3: Don’t use just one record for the whole house.
Place a record in each environment where there are water points (bathrooms, kitchens, service area, etc.). So, if there is a problem, you can close only the necessary section, and you don’t run out of water in the whole house.

4: Pay attention to the manufacturer’s brand of tubes and fittings when buying. As much as all tubes look the same, they are not. Different brands of parts may not fit together well, which increases the risk of leakage. Therefore, whatever brand you choose at the beginning, go with it in the part of pipes and connections for the whole house, checking this at the time of each purchase. And, of course, prefer materials with quality and certification. Tips to unclog pipe

5: Be careful when storing pipes and fittings in any way during construction. Tubes must always be stored in a horizontal position. Connections must be in bags or boxes. The material should be in a shady place, without direct sunlight to avoid damage.

6: Try to carefully measure the spaces when defining the position of future water points and sanitary ware. Remember that the toilet must have at least 20 centimeters free on each of its sides.

7: Together with the mason, before closing the wall, test all the plumbing. Check that there are no leaks before installing faucets, toilet and shower. Make sure the water tank is full before starting the test. It will then be possible to see if there are any leak points and where they are. Only after making sure that the piping is good, without leaks, authorize the mason to close the walls.

8: Keep the hydraulic installation plan after the work is finished. The pipes are not visible and we soon forget where they go. The best thing to do is to have a hydraulic project or plant. One way to ensure information is to arrange with the plumber and mason that you will take pictures of all the walls and floor with the exposed pipes, before the walls and floor are closed.

9: Plan other water outlet points for appliances and faucets, such as a water filter, a faucet in the backyard, including the height of such faucets.

By aamritri

Leave a Reply

Your email address will not be published.

Related Posts

No widgets found. Go to Widget page and add the widget in Offcanvas Sidebar Widget Area.