How to Install Faucet?

plumber

Do you need a step by step to install Automatic Faucet? Below you will see how simple the installation is.

When you discover the benefits of the Automatic Faucet, among them the enormous savings in water, it is natural that you want to buy yours immediately.

Going on the internet, finding the model you like and making the purchase is not that difficult.

But when you receive it at home, all you want is to install the faucet as quickly as possible to start saving right away.

The process of installing your faucet should be as simple as the purchase process.

You don’t need to hire a plumber to do the installation work.

With the help of our step-by-step guide, you can install your Automatic Faucet yourself and save your money.

STEP BY STEP TO INSTALL AUTOMATIC TAP:


Before anything else, close the general register of the environment where the faucet will be installed.

Separate the tools and materials that will be used.

Open the package and check each part, screw and bushing. Be careful not to let the screws fall into the sink.

And if you think it’s safer, cover the drain. For More Plumbing Tips Click here

NOW LET’S GO TO PERFORM THE INSTALLATION:

  • Remove the fixing piece and the gasket from the faucet body.
  • Install the faucet with the finishing sealing frame into the hole in the washbasin or countertop (recommended hole size: 25 mm).
  • If you are going to use a flow regulator, it must be placed on the base of the faucet before fixing it to the bench or wall.
  • Position the faucet and replace the gasket and fastening nut under the countertop (for wall faucets, the fastening is made directly to the water outlet of the wall with thread-sealing tape).
  • Align the faucet, hold tight and tighten the fixing nut to ensure the faucet does not rotate.
  • Connect a flexible hose (usually purchased separately) to the faucet and wall water outlet.
  • Ready your Automatic Faucet is ready to save water.

Cold water pipes: the 4 most common types of connections

The hydraulic system of a house is composed of a series of installations and subsystems that perform the capture, storage and transport of fluids such as sanitary sewage, hot and cold water. There are different types of tube and material used in the hydraulic system, each with a specific indication of application.

In the case of pipes and connections for cold water, it is necessary that the material is of high quality and that the connections are very well installed, in order to guarantee that there are no leaks or infiltration.

4 types of tubes and connections suitable for cold water:


PVC
Tubes made of polyvinyl chloride (PVC) are the most common and most used, being indicated for cold water. They have different sizes, which adapt according to the place where they will be installed, and can be welded or threaded. It is worth noting that PVC does not withstand temperatures above 25 degrees Celsius and, therefore, they are not pipes that must be used for hot water. Ideally, PVC pipes are used to carry cold water to faucets and electric showers.

CPVC
They are very similar to PVC pipes, with the difference that chlorinated polyvinyl chloride (CPVC) pipes are more resistant and suitable not only for cold water, but also for hot water. They are cold welded and more practical for mounting the hydraulic system. It is suitable for installations where it will be necessary to use cold and hot water, such as sinks and gas showers.

PEX
Cross-linked polyethylene (PEX) tubes are flexible and very reminiscent of a garden hose. They have great thermal resistance and can be used not only for cold water but also for hot water. Its useful life is longer when compared to PVC pipes.

PPR
Random co polymer polypropylene (PPR) is a very practical type of connection, as it does not require soldering, paste or glues. The material withstands a temperature of up to 80 degrees and, therefore, can be used for both cold and hot water. Its main advantage is being able to maintain the temperature of the water as it passes through the pipes.

By aamritri

Leave a Reply

Your email address will not be published.

Related Posts

No widgets found. Go to Widget page and add the widget in Offcanvas Sidebar Widget Area.